![]() ![]()
This meant that while the SSD was removable and theoretically upgradeable, there was no other drive available to actually replace it with. However in typical Apple style, they decided to use a proprietary PCI-e connector instead of the standard M.2 slot used by the rest of the computer industry. #What usb codec is 2015 apple macbook pro using mac#While almost every Mac laptop released in the last five years has had a soldered PCI-E SSD, preventing upgrades, one model stood out in having a removable SSD – The A1708 13 inch MacBook Pro from late 2016 and mid 2017. Using standard M.2 NVMe SSD drives in the 20 A1708 MacBook Pro 13″ is now possible thanks to the release of an adapter from Sintech. Verify this is the device controlling output by clicking on wheel in the lower left of the left-side panel.Sintech NVMe SSD Adapter for MacBook Pro A1708 - Image credit: Sintech.Highlight the USB Audio CODEC selection that is locked to Output.Verify this is the device controlling input by clicking on the wheel in the lower left of the left-side panel.Highlight Built-in Microphone in the left-side panel.The objective is to make both of these match what you set under the Audio tab of WSJTX. The relevant ones are Built-in Microphone and the USB Audio CODEC selection that is locked to Output. Note that Built-in Microphone and one of the USB Audio CODEC selections are locked to Input on the right-side panel Built-in Output and the other USB Audio CODEC selection are locked to Output.You should see four selections in the left-side panel.Using the Audio Midi Setup Utility (found under Applications/Other, not under the usual System Preferences): Your computer will not display your two 'USB Audio CODEC' selections until/unless it detects the live USB connection. make sure your computer is connected to your radio before performing this step. Menu 76 (VOX Operation With Data Input): On.Menu 70 (Source Of Send/PTT Transmission): Front.Menu 69 (Line Selection For Data Communications): USB.Transmit Audio Source: Front/Mic (checking 'VOX' under PTT Method actually grays-out this selection).Baud Rate: 115200 (does not have to be this but whatever you choose must match radio). #What usb codec is 2015 apple macbook pro using serial#Serial Port: /dev/cu.SLAB_USBtoUART (same driver previously loaded for MacLoggerDX).Here are the settings I found to work, in the event they're helpful to anyone else: My concern about there being a Mac-specific sound card issue that was preventing WSJTX from working was unfounded. ![]() Okay, answering my own question, after a bit more playing around. I can see signals across the selected band, both in the waterfall and within the program's main screen. I can key the radio just fine, but with no apparent outgoing signal. #What usb codec is 2015 apple macbook pro using Pc#Wondering if perhaps it's something within MacOS (I'm running Sierra, 10.12), I pulled out an older 13" MacBook Air running bootcamp w/Windows 7, downloaded the PC version of WSJTX, and tried that. I can hear the tones being generated by WSJTX, so presume it's not an application issue. I've gone through the couple options in Apple's Audio Midi Setup utility and don't see anything there amiss. My LP-100A watt meter inline to my antenna does not trigger and there is no response via either search and pounce or CQ'ing. When I exit the preferences menu and try and operate with FT-8, however, it does not appear I'm actually generating a transmit signal (notwithstanding that the red light on the radio says that it is). I've got WSJTX configured so CAT control works fine and the Test PTT button under the 'Radio' tab in preferences will reliably key the radio (the radio relay audibly trips and the red light on the front panel of the radio illuminates). Am trying to get FT-8 working via my Kenwood TS-590SG, with a USB connection to my mid-2015 MacBook Pro. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |